SHELL OIL COMPANY -- SHELL TELLUS OIL 68 -- 9150-00-966-8835
<pre>===================== Product Identification =====================
Product ID:SHELL TELLUS OIL 68
MSDS Date:11/16/1992
FSC:9150
NIIN:00-966-8835
=== Responsible Party ===
Company Name:SHELL OIL COMPANY
Address:1 SHELL PLAZA
Box:2463
City:HOUSTON
State:TX
ZIP:77001
Country:US
Info Phone Num:713-241-4819
Emergency Phone Num:713-473-9461 (24 HOUR EMERGENCY)
CAGE:54527
=== Contractor Identification ===
Company Name:SHELL OIL COMPANY
Box:2463
City:HOUSTON
State:TX
ZIP:77210
Country:US
Phone:800-231-6950
CAGE:54527
============= Composition/Information on Ingredients =============
Ingred Name:MINERAL OIL, PETROLEUM DISTILLATES,HYDROTREATED
(MILD),HEAVY PARAFFINIC
CAS:64742-54-7
RTECS #:PY8035500
Fraction by Wt: 0-99% %
Other REC Limits:NONE RECOMMENDED
OSHA PEL:5 MG/M3 (OIL MIST)
ACGIH TLV:5 MG/M3 (OIL MIST)
Ingred Name:MINERAL OIL, PETROLEUM DISTILLATE, SOLVENT DEWAXED (MILD),
HEAVY PARAFFINIC
CAS:64742-65-0
RTECS #:PY8038500
Fraction by Wt: 0-99% %
Other REC Limits:NONE RECOMMENDED
Ingred Name:MINOR ADDITIVES
Fraction by Wt: < 2%
Other REC Limits:NONE RECOMMENDED
===================== Hazards Identification =====================
LD50 LC50 Mixture:TLV 5 MG/M3 OIL MIST.
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:PRACTICALLY NON-IRRITATING TO THE
EYES. PROLONGED OR REPEATED CONTACT MAY CAUSE DERMATITIS. VAPORS
MAY IRRITATE THE NOSE, THROAT AND UPPER RESPIRATORY TRACT.
INGESTION MAY CAUSE GI DISTURBANCES. ACCID ENTAL RELEASE UNDER HIGH
PRESSURE APPLICATIONS MAY RESULT IN INJECTION OF OIL INTO THE SKIN
CAUSING LOCAL NECROSIS.
Explanation of Carcinogenicity:THIS COMPOUND CONTAINS NO INGREDIENTS AT
CONCENTRATIONS OF 0.1% OR GREATER THAT ARE CARCINOGENS OR SUSPECT
CARCINOGENS.
Effects of Overexposure:EYE IRRITATION, SKIN IRRITATION, DERMATITIS,
UPPER RESPIRATORY TRACT IRRITATION, NAUSEA, VOMITING, DIARRHEA.
NECROSIS MAY BE EVIDENCED BY DELAYED ONSET OF PAIN AND TISSUE
DAMAGE A FEW HOURS FOLLOWING HIGH PRESSURE INJECTION.
Medical Cond Aggravated by Exposure:PRE-EXISTING SKIN AND/OR
RESPIRATORY DISORDERS MAY BE AGGRAVATED BY EXPOSURE TO THIS
PRODUCT.
======================= First Aid Measures =======================
First Aid:EYES: FLUSH WITH WATER FOR 15 MINUTES WHILE HOLDING EYELIDS
OPEN. GET MEDICAL ATTENTION. SKIN: REMOVE CONTAMINATED CLOTHING.
WASH WITH SOAP AND WATER. IF IRRITATION PERSISTS, GET MEDICAL
ATTENTION. IF MATERIAL IS INJECTED UNDER THE SKIN, GET MEDICAL
ATTENTION PROMPTLY. INHALATION: REMOVE TO FRESH AIR. RESTORE
BREATHING. GET MEDICAL ATTENTION. INGESTION: DO NOT INDUCE
VOMITING. CONTACT PHYSICIAN.
===================== Fire Fighting Measures =====================
Flash Point Method:PMCC
Flash Point:370F,188C
Lower Limits:NOT GIVEN
Upper Limits:NOT GIVEN
Extinguishing Media:WATER FOG, DRY CHEMICAL, CARBON DIOXIDE, FOAM. DO
NOT USE A DIRECT STREAM OF WATER.
Fire Fighting Procedures:FIRE FIGHTERS SHOULD USE NIOSH APPROVED SCBA &
FULL PROTECTIVE EQUIPMENT WHEN FIGHTING CHEMICAL FIRE. USE WATER
SPRAY TO COOL NEARBY CONTAINERS EXPOSED TO FIRE.
Unusual Fire/Explosion Hazard:PRODUCT WILL FLOAT AND CAN BE REIGNITED.
TOXIC GASES ARE RELEASED DURING COMBUSTION.
================== Accidental Release Measures ==================
Spill Release Procedures:ELIMINATE SOURCES OF IGNITION. EVACUATE AREA.
WEAR PROPER PERSONAL PROTECTIVE EQUIPMENT. CONTAIN SPILL. STOP LEAK
IF CAN DO SO WITHOUT RISK. ABSORB LIQUID WITH SUITABLE ABSORBENT
MATERIAL. COLLECT FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
====================== Handling and Storage ======================
Handling and Storage Precautions:STORE IN A COOL, DRY PLACE WITH
ADEQUATE VENTILATION. KEEP AWAY FROM OPEN FLAMES AND HIGH
TEMPERATURES.
Other Precautions:AVOID SKIN CONTACT. LAUNDER CONTAMINATED CLOTHING
BEFORE REUSE.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:IF VENTILATION DOES NOT MAINTAIN INHALATION
EXOSURES BELOW PEL (TLV), USE NIOSH/MSHA APPROVED RESPIRATOR AS PER
CURRENT 29 CFR 1910.134, INSTRUCTIONS/WARNINGS AND NIOSH RESPIRATOR
SELECTION.
Ventilation:LOCAL EXHAUST AND MECHANICAL (GENERAL) VENTILATION TO
MAINTAIN EXPOSURE LEVELS.
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY GLASSES OR GOGGLES
Other Protective Equipment:PROTECTIVE CLOTHING AS REQUIRED TO AVOID
SKIN CONTACT. AN EMERGENCY EYE WASH STATION AND SHOWER SHOULD BE
AVAILABLE.
Work Hygienic Practices:WASH WITH SOAP AND WATER AFTER HANDLING PRODUCT
AND BEFORE EATING DRINKING OR SMOKING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
================== Physical/Chemical Properties ==================
HCC:V6
Boiling Pt:B.P. Text:NOT GIVEN
Melt/Freeze Pt:M.P/F.P Text:-5F,-21C
Vapor Pres:NOT GIVEN
Vapor Density:NOT GIVEN
Spec Gravity:0.8729
Evaporation Rate & Reference:NOT GIVEN
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CREAM WHITE LIQUID, SLIGHT HYDROCARBON ODOR
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS
Stability Condition to Avoid:HEAT, OPEN FLAME
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
UNIDENTIFIED ORGANIC COMPOUNDS.
==================== Disposal Considerations ====================
Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT. DISCARD ANY PRODUCT, RESIDUE, DISPOSAL CONTAINER OR
LINER IN ACCORDANCE WITH ALL FEDERAL, STATE AND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.